Golden Gate 3.5mm Mini M > F

Analog Audio Interconnect Cable

Connect a wide range of audio electronics with this AudioQuest Golden Gate 3.5mm Mini analog interconnect, meticulously designed for outstanding flexibility and versatility. Solid Perfect-Surface Copper (PSC) conductors minimize distortion, Foamed-Polyethylene insulation preserves dynamic contrasts, and a Metal-Layer Noise-Dissipation efficiently dissipates high-frequency noise for cleaner, clearer, more naturally beautiful music.

$139.95 USD
SKU: GOLDG02MF  |  Barcode: 092592075726

Key Features & Technology Explained

  • Solid conductors prevent strand-interaction, a major source of dynamic distortion in cables.

  • To an even greater extent than LGC, higher-purity Perfect-Surface Copper (PSC) conductors minimize distortion caused by grain boundaries.

  • Metal-Layer Noise-Dissipation shields noise effectively, absorbing and reflecting most RFI before it reaches the ground layer.

  • Foamed-Polyethylene's high air content minimizes energy absorption for clearer sound.

  • All conductors controlled for RF-noise directionality.

Spezifikation

Beschreibung

    Solid Perfect-Surface Copper (PSC) Conductors
    Since the beginning, AudioQuest has pioneered the use of superior metals, yet even we were surprised by the huge leap in performance attained through the astonishingly smooth and pure surface of Perfect-Surface Copper (PSC). Proprietary metal-processing technology protects the wire's surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure, and smooth as possible, it becomes a wonderfully low-distortion conductor. In a conventional cable, electrical and magnetic interaction between strands is one of the greatest sources of distortion, often causing a somewhat harsh, dirty sound. Solid conductors are fundamental toward achieving a very clean, natural sound.

    Metal-Layer Noise-Dissipation
    It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

    Foamed-Polyethylene Insulation
    Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

    Asymmetrical Double-Balanced Geometry
    Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

    Cold-Welded, Gold-Plated Terminations
    This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.
AudioQuest Golden Gate 3.5mm Mini M > F - GOLDG02MF 2 m = 6 ft 6 in
AudioQuest

Golden Gate 3.5mm Mini M > F

$139.95 USD

Noise Dissipation

Metal-Layer

A/V Conductor

-

eARC Conductor

-

Ground Reference

-

-

Geometry

Asymmetrical Double-Balanced

Gauge

-

Metal

Solid Perfect-Surface Copper (PSC)

Pair or Single

1 Single Cable - 1 x 5 Pin DIN > 1 x 5 Pin DIN Cable

Series

Bridges & Falls

Speaker-End Connector

-

Amplifier-End Connector

-

-

-

-

Output

-

DAC Chip

-

Volume Control

-

Desktop Compatibility

-

Mobile Compatibility

-

Application Options

-

-

Included Adaptor

-

Dimensions

-

Cable Length

  • 2 m = 6 ft 6 in
  • 5 m = 16 ft 5 in
Produkt anzeigen