Evergreen RCA > RCA

模拟音频连接线

使用这款AudioQuest Evergreen RCA模拟互连连接各种音频电子设备,该产品经过精心设计,具有出色的灵活性和多功能性。实心长晶铜(LGC)导体可最大限度地减少失真,发泡聚乙烯绝缘可保持动态对比度,金属层噪声消散则有效消除高频噪声,使音乐更干净、更清晰、更自然美丽。

$73.95 USD
SKU: EVERG0.6R  |  UPC: 092592060456

关键特性与技术说明

  • 实心导体可防止线芯相互作用,这是电缆中动态失真的主要来源。

  • 高纯度长晶铜 (LGC) 导体可最大限度地减少由晶界引起的失真。

  • 金属层噪声消散有效屏蔽噪声,在到达接地层之前吸收并反射大部分射频干扰。

  • 泡沫聚乙烯的高气含量最小化了能量吸收,从而实现更清晰的声音。

  • 所有导体均控制射频噪声的方向性。

规格

描述

    Solid Long-Grain Copper (LGC) Conductors
    Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

    Metal-Layer Noise-Dissipation
    It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

    Foamed-Polyethylene Insulation
    Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

    Asymmetrical Double-Balanced Geometry
    Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

    Cold-Welded, Gold-Plated Terminations
    This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.
AudioQuest Evergreen RCA > RCA - EVERG0.6R 0.6 m = 1 ft 11 in
AudioQuest

Evergreen RCA > RCA

$73.95 USD

噪声消散

金属层

A/V 导体

-

eARC 导体

-

接地参考

-

-

几何形状

不对称双平衡

规格

-

金属

实心长晶铜 (LGC)

成对或单个

1根单线 - 2 x 公头RCA > 2 x 公头RCA

系列

桥梁与瀑布

扬声器端连接器

-

放大器端连接器

-

-

-

-

输出

-

DAC 芯片

-

音量控制

-

桌面兼容性

-

移动设备兼容性

-

应用选项

-

-

包含适配器

-

尺寸

-

电缆长度

  • 0.6 米 = 1 英尺 11 英寸
  • 1 米 = 3 英尺 3 英寸
  • 1.5 米 = 4 英尺 11 英寸
  • 2 米 = 6 英尺 6 英寸
  • 3 米 = 9 英尺 10 英寸
  • 5 米 = 16 英尺 5 英寸
  • 8 米 = 26 英尺 3 英寸
  • 12 米 = 39 英尺 4 英寸
  • 16 米 = 52 英尺 5 英寸
  • 20 米 = 65 英尺 7 英寸
查看产品