AudioQuest 产品被《绝对音响》编辑推荐
一系列精彩的AudioQuest产品获得了The Absolute Sound的2025年编辑选择奖。
通常,选择用叉片或香蕉插头终止您的音箱线缆将取决于个人喜好。然而,某些功率放大器上使用的符合欧盟标准的隔离接线柱通常使得以高扭矩或压力拧紧叉片变得困难甚至不可能。在这些应用中,AudioQuest的香蕉插头是更好的选择,甚至可能是唯一的选择。
AudioQuest对当代放大器制造商进行了相当广泛的调查,以确定叉片或香蕉插头是否更适合某个品牌和型号的放大器。请联系我们,提供放大器的品牌和型号,我们会回复最佳连接器类型。
在这里,我们通常推荐U型叉片或香蕉插头。然而,尽管在线缆的这一侧(特别是对于双线组)重量和压力较小,但仍需注意接线柱的设计。如果香蕉插头无法完全插入接线柱,我们建议使用我们的叉片连接器之一。
This AC outlet is intended for single phase AC branch circuits ranging from 220 to 240 volts AC, with either a 50 or 60 Hertz sine wave frequency. If the branch circuit uses a 15 amp circuit breaker, it is appropriate to employ the NRG Edison 15. For a 20 amp service, use an NRG Edison 20. The service circuit breaker should be 20 amp rated with at least #12 AWG wiring or heavier (lower number) gauge.
Recommendations for dedicated wiring:
The AudioQuest NRG Edison 15 & 20 AC duplex outlet can accommodate up to #8 AWG wiring, although #10 or #12 may have superior properties versus #8 AWG wire in terms of noise dissipation, that is, routing RF noise back to the electrical panel and ground rod-stake. This is due to skin effect at radio frequencies favoring thinner wire gauges, thus making noise reduction more efficient with a thinner wire gauge. This is an important consideration when optimizing your system with a dedicated line, that is, a discrete Line, Neutral, and Ground wire that travels back to your primary electrical panel without other AC outlets being daisy-chained or series connected to or from any of these wire leads.
The lower the wire resistance (using heavier wire-cable), the lower the AC impedance that is present at 50-60 Hz. This is an advantage for any power amplifier. However, it is equally true that providing optimal noise dissipation (routing radio frequency noise away from your system’s delicate components), is more efficient with slightly smaller wire diameters. Whenever possible, solid core electrical grade AC wiring will yield superior results. We find that when a dedicated AC line is installed, #10 to #12 AWG wiring is the best compromise regardless of whether the branch circuit is meant for 15 or 20 amp operation.
A dedicated line may not be possible (nor is it absolutely necessary), particularly if the installation is in a rented, leased, or temporary space. Even with stock wiring of a 10 or 15 amp service, your system will benefit greatly from the installation of the NRG Edison AC duplex outlet.
(点击热点了解详情)