Tower 3.5mm Mini M > F

Analog Audio Interconnect Cable

Connect a wide range of audio electronics with this AudioQuest Tower 3.5mm Mini analog interconnect, meticulously designed for outstanding flexibility and versatility. Solid Long-Grain Copper (LGC) conductors minimize distortion, Foamed-Polyethylene insulation preserves dynamic contrasts, and a Metal-Layer Noise-Dissipation efficiently dissipates high-frequency noise for cleaner, clearer, more naturally beautiful music.

$69.95 USD
SKU: TOWER03MF  |  Código de barras: 092592014343

Características clave y tecnología explicada

  • Los conductores de cobre de grano largo sólido (LGC) eliminan tanto la interacción eléctrica como magnética entre hilos, principales fuentes de distorsión en los cables.

  • Los escudos de disipación de ruido de capa metálica reducen el ruido de manera efectiva, absorbiendo y reflejando la mayoría de las RFI antes de que lleguen a la capa de tierra.

  • El alto contenido de aire del Polietileno Espumado minimiza la absorción de energía para un sonido más claro.

Especificaciones

Descripción

    Solid Long-Grain Copper (LGC) Conductors
    Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

    Metal-Layer Noise-Dissipation
    It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

    Foamed-Polyethylene Insulation
    Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

    Asymmetrical Double-Balanced Geometry
    Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

    Cold-Welded, Gold-Plated Terminations
    This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

AudioQuest Tower 3.5mm Mini M > F - TOWER03MF 3 m = 9 ft 10 in
AudioQuest

Tower 3.5mm Mini M > F

$69.95 USD

Disipación de ruido

Metal-Layer

Conductor A/V

-

Conductor eARC

-

Referencia de tierra

-

-

Geometría

Asymmetrical Double-Balanced

Calibre

-

Metal

Solid Long-Grain Copper (LGC)

Par o individual

1 Single Cable - 1 x 3.5mm Male Mini > 1 x 3.5mm Female Mini

Serie

Bridges & Falls

Conector de extremo de altavoz

-

Conector de extremo de amplificador

-

-

-

-

Salida

-

Chip DAC

-

Control de volumen

-

Compatibilidad de escritorio

-

Compatibilidad móvil

-

Opciones de aplicación

-

-

Adaptador incluido

-

Dimensiones

-

Longitud del cable

  • 3 m = 9 pies 10 pulgadas
  • 5 m = 16 pies 5 pulgadas
Ver producto