Niagara 3000 Delivers Power, Protection, Performance
Power management is a hot topic in audio. Niagara 3000 loves the attention.
Analog Audio Interconnect Cable
Often, the choice between terminating your speaker cables with spade lugs or banana plugs will come down to personal preference. However, the EU-compliant isolated binding posts used on some power amplifiers often makes it difficult if not impossible to tighten spade lugs with high torque or pressure. In these applications, the AudioQuest banana connector is the superior choice, and may be the only choice.
AudioQuest has conducted a fairly extensive survey of contemporary amplifier manufacturers to determine whether spades or bananas will be most appropriate for a given brand and model of amplifier. Please contact us, provide the brand and model of the amplifier, and we’ll respond with the optimal connector type.
Here we typically recommend the U-Spade or banana connector. However, even though there is less weight and pressure on this side of the cable (particularly for BiWire sets), it is nevertheless important to note the binding post’s design. If a banana connector cannot seat all the way into the binding post, we recommend one of our spade connectors.
If not for its Mythical siblings — FireBird and Dragon — ThunderBird might be the best cable the world has ever heard.
Among other tried-and-true AudioQuest materials and design techniques, ThunderBird features solid directionally controlled conductors of our finest copper — Perfect Surface Copper+ (PSC+) — Copper-Plated RF-Draining Barrels, and our Level-6 Noise-Dissipation System.
All Mythical Creature interconnects are available with custom-made RCA and XLR terminations.
Solid Perfect-Surface Copper+ (PSC+) Conductors
Solid conductors prevent electrical and magnetic strand-interaction. PSC+ Solid-Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation.
Level 6 Noise-Dissipation: ZERO-Tech + Carbon/Graphene Mesh-Network + Direction-Controlled
Radio-Frequency Noise from cellular, WiFi, and satellites is everywhere. AQ’s Level 6 Linear Noise-Dissipation includes a carbon & graphene resistive mesh-network, direction-controlled conductors, and Silver-Plated drain wires, significantly minimizing RF Noise masking effects.
ZERO-Tech (No Characteristic Impedance) for Linear, Wide-Bandwidth Noise-Dissipation
The only way to avoid characteristic-impedance mismatch-effects between a cable and its attached source and load circuits is to prevent the cable from having a characteristic-impedance. ZERO-Tech succeeds by eliminating the electrostatic field between the cable’s high and low signal conductors, enabling linear (consistent octave to octave) Radio-Frequency (RF) Noise-Dissipation, and uncompressed transients. In order to preserve ZERO-Tech’s complete isolation between signal conductors, a Dual-72v DBS pack is included for Pegasus, ThunderBird, FireBird, and Dragon XLR cables.
72v Dielectric-Bias System (DBS)
Insulation is also a dielectric that can act like a shunt-filter. Biasing minimizes dielectric-noise and linearizes the filter, significantly improving wide-bandwidth dissipation of induced RF noise.
FEP Air-Tube Insulation
Positive conductors benefit from almost no contact between metal and its FEP insulation, which is notable for its superior dielectric constant and minimal signal interference. Negative conductors benefit from intentionally “lossy insulation” — no air and no FEP helps maximize the negative connection’s different job.
6% Silver-Plated RF Drain-Wires
Direction-Controlled Silver-Plated RF Drain-Wires further ensure the proper and efficient dissipation of induced radio-frequency noise for clearer, more natural sound.
Copper-Plated RF-Draining Barrels
Grounded Copper-Plated Barrels maximize Noise-Dissipation by preventing a metal barrel from capacitively coupling RF to the conductors.
Hanging-Silver over Red Copper Plugs
AudioQuest’s finest plugs feature superior Hanging-Silver (not tumbled) directly over extreme-purity Red Copper to ensure uncompromised signal transfer.
Technical Specifications | |
---|---|
Cable Configuration |
2 Single Cables - 1 x Male RCA > 1 x Male RCA
|
Metal |
ZERO: Solid Perfect-Surface Copper+ (PSC+) / BASS: Solid Perfect-Surface Copper+ (PSC+)
|
Noise Dissipation |
Graphene/Carbon Mesh-Network + 72v DBS
|
Geometry |
ZERO-Tech
|
Insulation |
|
Terminations |
|
Signal Type |
|
Cable Length |
0.5 m = 1 ft 7 in
|
Jacket |
Blue on Black Braid
|
Weights & Dimensions | |
Sold As |
|
ThunderBird RCA > RCAVanaf $1,150.00 Details bekijken | Pegasus RCA > RCAVanaf $717.50 Details bekijken | FireBird RCA > RCAVanaf $2,200.00 Details bekijken | Dragon RCA > RCAVanaf $3,625.00 Details bekijken | |
---|---|---|---|---|
Cable Configuration |
2 Single Cables - 1 x Male RCA > 1 x Male RCA
|
2 Single Cables - 1 x Male RCA > 1 x Male RCA
|
2 Single Cables - 1 x Male RCA > 1 x Male RCA
|
2 Single Cables - 1 x Male RCA > 1 x Male RCA
|
Metal |
ZERO: Solid Perfect-Surface Copper+ (PSC+) / BASS: Solid Perfect-Surface Copper+ (PSC+)
|
ZERO: Solid Perfect-Surface Copper+ (PSC+) / BASS: Solid Perfect-Surface Copper+ (PSC+)
|
Solid Perfect-Surface Silver (PSS)
|
Solid Perfect-Surface Silver (PSS)
|
Noise Dissipation |
Graphene/Carbon Mesh-Network + 72v DBS
|
Graphene/Carbon Mesh-Network + 72v DBS
|
Graphene/Carbon Mesh-Network + 72v DBS
|
Graphene/Carbon Mesh-Network + 72v DBS + PSS Drains
|
Geometry |
ZERO-Tech
|
ZERO-Tech
|
ZERO-Tech
|
ZERO-Tech
|
Insulation |
|
|
|
|
Terminations |
|
|
|
|
Signal Type |
|
|
|
|
Sold As |
|
|
|
|