Niagara 3000 Delivers Power, Protection, Performance
Power management is a hot topic in audio. Niagara 3000 loves the attention.
Loading...
Niagara 7000 Power Conditioner
w/ Linear Noise-Dissipation & Non-Sacrificial Surge Protection
$11,000.00 USD
Unit price
/
Unavailable
SKU:
NIAGARA7000USA
Amplifier-End Connector: Multi-Spade, Banana, U-Spade, or V-Spade
Often, the choice between terminating your speaker cables with spade lugs or banana plugs will come down to personal preference. However, the EU-compliant isolated binding posts used on some power amplifiers often makes it difficult if not impossible to tighten spade lugs with high torque or pressure. In these applications, the AudioQuest banana connector is the superior choice, and may be the only choice.
AudioQuest has conducted a fairly extensive survey of contemporary amplifier manufacturers to determine whether spades or bananas will be most appropriate for a given brand and model of amplifier. Please contact us, provide the brand and model of the amplifier, and we’ll respond with the optimal connector type.
Given the girth and weight of our Mythical Creature Series speaker cables, a spade may be better capable of fully supporting the cable. This is particularly a concern with binding posts that do not allow a banana connector to fully seat into the post. The EU-compliant posts will neither accept our V-Spade nor allow our Multi-Spade to be fully seated. For these applications (or when you’re not certain), we highly recommend the U-Spade, as it can accommodate any binding post. The V-Spade is a specialty spade connector that works well with large wingnut binding posts (such as the Mundorf ), as it allows extra clearance.
Speaker-End Connector: Spade or Banana
Here we typically recommend the U-Spade or banana connector. However, even though there is less weight and pressure on this side of the cable (particularly for BiWire sets), it is nevertheless important to note the binding post’s design. If a banana connector cannot seat all the way into the binding post, we recommend one of our spade connectors.
Specifications
Specifications
Description
Description
- Patented Dielectric-Biased Symmetrical Power Isolation Transformers: 2 for source component outlet banks
- Transient Power Correction: 90 amps peak. Provides a current reservoir for any power amplifier (up to 25mS)
- Level-X Ultra-Linear Noise-Dissipation Technology: More than 23 octaves differential-mode filtering (3kHz–1GHz in excess of 24dB reduction) and 20 octaves common-mode filtering (60Hz–100MHz in excess of 30dB reduction) with linear response, optimized for varying line and load impedance
- Patented Ground Noise-Dissipation System (All outlets): 6 banks of direction-controlled ground noise-dissipation
- Non-Sacrificial Surge Protection: Withstands multiple AC surges and spikes up to 6000V/3000A without sustaining damage–sonically non-invasive
- Maximum RMS Input Current: 20 Amps (RMS)
- Maximum RMS Current per Source Component Output Bank: 5 Amps (RMS)
- Outlets: Source (8); High-Current (4)
- Dimensions: 17.5” W x 5.875” H (5.24” H without feet) x 17.2” D (3-RU Rack Mount Kits Optional)
- Weight: 92lbs. (US); 41.7kg.
Niagara 7000 takes a holistic, science-based approach to AC power technology and represents a comprehensive solution to the ever-increasing noise that plagues our power lines.
In the Niagara 7000, you’ll find optimized radio-frequency lead directionality, run-in capacitor forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper assuring the tightest grip possible.
The Niagara 7000 uses our patented AC Ground-Noise Dissipation, the world’s first Dielectric-Biased AC Isolation Transformers, and the widest bandwidth-linearized noise-dissipation circuit in the industry. Our unique passive/active Transient Power Correction Circuit features an instantaneous current reservoir of over 90 amps peak, specifically designed for today’s current-starved power amplifiers. Most AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 7000 corrects it.
With an AudioQuest Niagara 7000, music lovers can finally experience the clarity, dimensionality, frequency extension, dynamic contrast, and grip their A/V systems have been capable of delivering—if only the power had been right!
In the Niagara 7000, you’ll find optimized radio-frequency lead directionality, run-in capacitor forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper assuring the tightest grip possible.
The Niagara 7000 uses our patented AC Ground-Noise Dissipation, the world’s first Dielectric-Biased AC Isolation Transformers, and the widest bandwidth-linearized noise-dissipation circuit in the industry. Our unique passive/active Transient Power Correction Circuit features an instantaneous current reservoir of over 90 amps peak, specifically designed for today’s current-starved power amplifiers. Most AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 7000 corrects it.
With an AudioQuest Niagara 7000, music lovers can finally experience the clarity, dimensionality, frequency extension, dynamic contrast, and grip their A/V systems have been capable of delivering—if only the power had been right!
| Technical Specifications | |
|---|---|
Noise Dissipation |
Linear Noise Dissipation and Patented Ground-Noise Dissipation- 6 Banks (all outlets)
|
Power Cable |
|
Transient Power Correction |
|
Non-Sacrificial Surge Protection |
|
Outlets |
|
Maximum RMS Current |
|
DBS Symmetrical Power Isolation Transformer |
|
| Weights & Dimensions | |
Sold As |
|
-
Niagara 7000 Quick Start Guide - English
-
Niagara 7000 Owners Manual - English
-
Niagara 7000 Component Connection Suggestions - English
-
White Paper: Power Demystified
-
Niagara 7000 Troubleshooting Guide - English
-
AQ Power Products Declaration of Conformity
-
Niagara 5000 / Niagara 7000 Warranty
-
Warranty & Product Registration
 Niagara 7000 Power Conditioner$11,000.00 View details |  Niagara 3000 Power Conditioner$3,900.00 View details |  Niagara 5000 Power Conditioner$5,900.00 View details | |
|---|---|---|---|
Noise Dissipation |
Linear Noise Dissipation and Patented Ground-Noise Dissipation- 6 Banks (all outlets)
|
Linear Noise Dissipation and Patented Ground-Noise Dissipation - 3 Banks (all outlets)
|
Linear Noise Dissipation and Patented Ground-Noise Dissipation- 6 Banks (all outlets)
|
Power Cable |
|
|
|
Transient Power Correction |
|
|
|
Non-Sacrificial Surge Protection |
|
|
|
Outlets |
|
—
|
|
Maximum RMS Current |
|
|
|
DBS Symmetrical Power Isolation Transformer |
|
|
|
Sold As |
|
|
|
News & Reviews
-
-
PowerQuest Delivers
Alberto Pittaluga dives deep into the benefits of power conditioning, explores the relatively modest PowerQuest 3, and decides it’s staying in his system.
-
On a Power Quest
Phil Wright goes on a power quest and arrives at Niagara.
-
Zen Widow Delivers Sonic Thrills
Originally published in the April issue of The Absolute Sound, Derk Richardson's excellent review of Zen Widow's latest release, IV: (from one dark age to another), is now available online.
-
Icons of Audio: Bill Low
AudioQuest’s founder and chief designer, William E. Low, is the featured guest in the premier episode of Stereophile’s YouTube series, “Icons of Audio.”
-
Niagara 1200 Saves the Day
Artur Evers of Like HiFi puts Niagara 1200 through its paces and, indeed, he likes.
-
Why HDMI Cables Are Important
In this video, Walts TV hosts a discussion with Angelo, a Field Educator responsible for product training at AudioQuest. We delve into viewer comments from previous AudioQuest videos, exploring the intricacies of...
-
20 AudioQuest Products Named TAS Editors' Choice
We are delighted to announce that 20 AQ products — across a wide range of categories, all representing outstanding performance and value — have received TAS’s 2024 Editors’ Choice Award.
